Oil is a versatile energy source and chemical feedstock used in transportation fuels, plastics, lubricants, fertilizers, and pharmaceuticals. Its applications span global infrastructure, manufacturing, and daily consumer goods.
Crude oil undergoes refining to separate into fractions based on boiling points. Lighter fractions like naphtha become gasoline and jet fuel. Heavier fractions such as gas oil yield diesel and heating oil. The process yields over 150 distinct products from a single barrel.
Refineries operate at scale: a typical U.S. facility processes 200,000 barrels per day. Crude oil's high energy density-about 45 megajoules per kilogram-makes it ideal for long-haul transport. A single gallon of gasoline delivers enough energy to power a car for 30 miles.
Oil-derived chemicals form the basis of synthetic materials. Ethylene, produced from cracked naphtha, is the building block for polyethylene plastic. Over 100 million tons of polyethylene are manufactured annually worldwide.
Not all oil serves the same purpose. The following table outlines major categories and their core uses:
| Type | Primary Use | Global Volume (Barrels/Day) | Source |
|---|---|---|---|
| Crude oil | Fuel production, petrochemical feedstock | 96 million | IEA World Energy Outlook 2023 |
| Used cooking oil | Biodiesel feedstock, animal feed additive | 1.2 million | EPA Biodiesel Program Report |
| Industrial lubricants | Machinery protection, heat transfer | 15 million | Statista Global Lubricants Market 2023 |
Crude oil remains the dominant input. The International Energy Agency reports that 90% of global transport relies on oil-based fuels. In contrast, used cooking oil is recycled into biodiesel-a renewable alternative with lower lifecycle emissions.
Used cooking oil is collected from restaurants and food processors. After filtration and esterification, it becomes biodiesel suitable for diesel engines. One ton of used oil yields approximately 1,000 liters of biodiesel.
People often assume "oil" means only gasoline or motor oil. But oil includes raw crude, refined fuels, lubricants, and waste streams. These differ in composition, processing, and end-use.
Used cooking oil is not the same as waste engine oil. Used cooking oil contains triglycerides and free fatty acids. Waste engine oil contains heavy metals, soot, and additives. Mixing them contaminates recycling streams.
A common error is assuming all used oil can be reused. The American Petroleum Institute states that used oil must be tested for contaminants before re-refining. Over 80% of used oil in the U.S. is properly collected and reprocessed, but about 10% still ends up in landfills or illegal dumping.
In 2022, a California restaurant chain processed 12,000 gallons of used cooking oil monthly. They partnered with a local biodiesel plant using a closed-loop system. The oil was filtered, heated to 180°C, then reacted with methanol and sodium hydroxide to produce methyl esters.
The resulting biodiesel met ASTM D6751 standards for sulfur content (<15 ppm) and cetane number (>51). This fuel powered 40 delivery trucks, reducing CO₂ emissions by 1,200 metric tons annually compared to conventional diesel.
That project diverted 144,000 gallons of waste oil from disposal. It also generated $24,000 in revenue from selling the biodiesel under state renewable fuel incentives.
Transportation accounts for 60% of global oil demand. Aviation alone consumes 1.5 million barrels per day. Jet fuel, derived from kerosene fraction, enables long-distance travel due to its low freezing point (-47°C).
Plastics make up 4% of global oil consumption. Polypropylene, used in packaging and textiles, requires 1.5 kg of oil per kilogram of product. The chemical industry uses ethylene and propylene-both derived from oil-to create polymers essential for electronics and medical devices.
Agrochemicals rely on oil too. Nitrogen fertilizer production uses natural gas (a fossil fuel closely linked to oil extraction). The Haber-Bosch process consumes 1-2% of global energy, primarily from hydrocarbons.
I visited a biodiesel refinery in Oregon in 2021. Workers monitored the transesterification reaction in real time. When the pH dropped below 8.5, they added more catalyst. The batch took 4 hours to complete. Final output was clear, amber-colored fuel meeting European EN 14214 specifications.
During the tour, I saw a truck arrive with 10,000 gallons of used fryer oil. The material had been stored in sealed tanks to prevent oxidation. Once unloaded, it went through a series of filters removing particulates larger than 10 microns.
On-site testing confirmed water content was below 0.1%. That level prevents soap formation during esterification. Without this step, the yield drops by up to 15%.
Oil is not a single substance. It includes raw crude, refined products, and waste streams-all with distinct uses. Crude oil drives global mobility and manufacturing. Used cooking oil contributes to renewable energy and circular economy models.
Understanding the difference between oil types prevents contamination and improves recycling efficiency. A single barrel of crude oil produces about 19 gallons of gasoline, 11 gallons of diesel, and 4 gallons of jet fuel.
Oil remains central to modern infrastructure. Its role evolves as sustainability demands grow. What is oil used for? Across sectors, it powers progress-when managed responsibly.