The Cambridge Audio CXA81 is a high-performance integrated amplifier rated at 80 watts per channel into 8 ohms, combining a high-quality preamplifier and power amplifier in a single chassis. It delivers precise, changing sound with support for balanced inputs and high-resolution audio formats, making it ideal for critical listening in a home audio setup.
Integrated amplifiers like the CXA81 eliminate the need for separate preamp and power amp components. The CXA81 processes audio signals through a discrete Class AB output stage, using a dual mono power supply design to reduce crosstalk between channels. This configuration ensures clean separation between left and right channels, enhancing stereo imaging and detail retrieval.
Signal path begins at the analog inputs-RCA and XLR (balanced)-where the CXA81 uses a high-precision operational amplifier circuit. These inputs route through a custom-designed analog gain stage before feeding into the power amplifier section. The amplifier uses a 300VA toroidal transformer and large heat sinks to maintain stable performance under continuous load. The result is consistent output even during demanding passages in orchestral recordings or complex electronic tracks.
The CXA81 operates by receiving audio signals from sources such as CD players, streaming devices, turntables, or digital streamers. It processes these signals through a dedicated preamplification stage, adjusting volume and selecting input sources via the front-panel rotary encoder or remote control. Once the signal is conditioned, it passes to the power amplifier section, which drives the connected loudspeakers.
Unlike older amplifiers that used switching power supplies, the CXA81 uses a linear power supply with regulated voltages. This reduces electromagnetic interference and ensures stable voltage delivery under varying load conditions. The amplifier's internal design features a single-ended input stage paired with a differential output stage, minimizing distortion and improving signal-to-noise ratio.
For digital audio, the CXA81 includes a built-in DAC (digital-to-analog converter) capable of decoding PCM up to 32-bit/384kHz and DSD64. This allows direct connection of USB audio sources such as computers or network streamers. The DAC uses a high-end ESS Sabre ES9038PRO chip, known for low jitter and high resolution. When using the USB input, the CXA81 supports asynchronous mode, reducing timing errors that degrade audio fidelity.
The CXA81 supports multiple input types, including RCA, XLR, and USB. It also features a headphone amplifier with a dedicated 6.3mm jack, capable of driving high-impedance headphones up to 300 ohms. The headphone output uses a separate circuit with independent power rails, ensuring clean playback without affecting speaker output.
| Feature | Specification |
|---|---|
| Power Output | 80 W per channel into 8 ohms, 120 W into 4 ohms |
| Frequency Response | 10 Hz - 100 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | 110 dB (unweighted, A-weighted) |
| DAC Support | ESS Sabre ES9038PRO, 32-bit/384kHz PCM, DSD64 |
| Input Types | RCA, XLR (balanced), USB Type-B |
| Dimensions | 435 mm (W) × 140 mm (H) × 380 mm (D) |
One non-obvious feature is the amplifier's "Auto Standby" function. After five minutes of inactivity, the CXA81 automatically powers down to save energy. It wakes instantly when a new signal is detected, with no warm-up delay. This behavior is verified by measurements from Rtings.com, which reported a standby power draw of less than 0.5 watts.
Some users assume the CXA81 requires a separate preamp because of its balanced inputs. This is incorrect. The CXA81 includes a fully integrated preamplifier section that handles level adjustment and source selection. Balanced inputs are included for compatibility with high-end gear, not as a sign of incomplete functionality.
Another misconception is that the CXA81 cannot drive low-impedance speakers. While it performs optimally with 6-8 ohm loads, it can deliver full power into 4-ohm speakers. However, sustained high-volume playback may cause thermal stress due to increased current demand. Cambridge Audio recommends using speakers with nominal impedance above 4 ohms for long-term reliability.
Users often confuse the CXA81 with the CXA61, a lower-powered version in the same product line. The CXA61 outputs 60 watts per channel and lacks a built-in DAC. The CXA81's higher power rating and integrated DAC make it better suited for modern digital sources and larger rooms.
In a test setup using a pair of KEF Q350 speakers and a Chord Hugo TT2 DAC, the CXA81 reproduced a live recording of a jazz quartet with strong clarity. Instruments were precisely placed in the soundstage-bass drum positioned behind the piano, saxophone slightly to the right. Transient response was tight, with no smearing on fast attacks.
A personal experience: I used the CXA81 with a vinyl turntable (Pro-Ject Debut Carbon) and a streaming box (Naim Uniti Qute). The amplifier handled both analog and digital sources smoothly. During a test of a 24-bit/192kHz recording of Debussy's *Clair de Lune*, the CXA81 revealed subtle changing shifts in the piano's sustain that were previously masked by a budget amplifier.
For room sizes up to 30 square meters, the CXA81 provides ample volume and detail. In smaller spaces, it can deliver satisfying dynamics at moderate levels. Its ability to handle both high- and low-level signals makes it versatile across genres-from classical string ensembles to electronic dance music.
The CXA81 serves as the central component in a minimalist high-fidelity system. It connects directly to speakers and accepts inputs from different sources. For digital audio, it pairs well with network streamers like the NAD C 658 or Sonos Amp. Analog sources such as turntables require a phono preamp, which can be added externally or via a compatible turntable with built-in preamp.
Cambridge Audio's commitment to transparency is evident in their published specifications. According to Cambridge Audio's official site, the CXA81's power supply design was validated through 10,000 hours of continuous testing under simulated real-world conditions. This focus on endurance aligns with their reputation for durable, high-quality audio equipment.
The Cambridge Audio CXA81 is a complete, high-fidelity audio solution. It combines useful amplification, high-resolution digital processing, and thoughtful engineering in a compact form factor. For listeners who value musical accuracy and system simplicity, it stands out as a benchmark in the integrated amplifier category.